Cenergy International
https://cdn.haleymarketing.com/templates/62343/logos/sm-logo-200x200.png
http://www.cenergyintl.com
http://www.cenergyintl.com
USD
25.00
30.00
HOUR
true
Roles and Responsibilities:
****Work location is Gilbert AZ NOT Orlando, FL. 1444 W. Scott Avenue Gilbert, AZ 85233****
Please only submit candidates that are local to the Gilbert, AZ site.
Safety Shoes will be required.
The individual will
work on site full time,
perform depot level repairs, modifications, refurbishments of specific components of the Modernized Target Designation Sight/Pilotage Night Vision System (M-TADS/PNVS),
perform solder to J-STD-001, IPC-7711/IPC-7721 standards,
perform electrical rework/repair of cable harnesses, electrical wires, and circuit card assemblies,
operate automated or general-purpose test equipment (oscilloscopes, multi-meters, network analyzers and waveform generators) and uses knowledge of basic AC/DC theory to read, interpret engineering drawings and schematics to conduct fault isolation of faulty components,
complete work in accordance with engineering drawings, schematics, Repair Component Procedures (RCPs), Field Advisory Bulletins (FABs), and Contactor Installation Procedures (CIPs),
document work in automated maintenance data collection systems IAW Apache Fire Control processes and procedures, and
performs test and checkout of mechanical, electrical, structural, hydraulic subsystems and complete systems.
Qualifications and Education Requirements:
Minimum HS Diploma / GED
Required Skills/Experience:
3+ years experience with INDUSTRY SOLDERING - Experience with soldering surface mount (SMT) and through hole components to PWBs
Trained in IPC specification J-STD-001.
Experience with microscopes
Able to identify and touch up poor wetted solder joints, solder voids / insufficient solder, solder shorts/ bridges, misaligned parts / leads, components and any out solder defects that may occur during the SMT operation.
Ability to perform electrical measurements and analysis using (Multimeters, Oscilloscope, Logic Analyzers, network analyzers and waveform generators)
3+ years experience with safety wire assemblies and connectors
3+ years experience with solder and repair cables and harnesses
3+ years experience with of Microsoft Office suite of programs
Must be able to read instructions and identify standard SMT components.
High School diploma, or equivalent experience/combined education, with additional technical training sufficient to perform preventive and demand maintenance tasks and minimum of 1 Year of experience.
Ability to understand schematics, generate rework instructions, diagnose faults and troubleshoot
Ability to lift 35 pounds.
Ability to adapt to dynamic and frequently changing customer requirements
Ability to understand policies and procedures for the control of Government property
Ability to work with hazardous materials
Ability to mix and weigh chemicals
Desired Skills:
Solder certification to J-STD-001, IPC-7711/IPC-7721
#CJ Secret
For more information, please email us at clearedemployee@cenergyintl.Com
Pay Range:
The pay range for this position is $25.00-30.00 per hour; however, the pay offered may vary depending on job-related knowledge, skills, and experience. This pay information is being provided pursuant to applicable law and is based in part on market location.
Please Note:
Must have a valid driver s license and current state required minimum vehicle insurance coverage to drive onto Client and Company property.
Benefits:
The benefits available with this position include:
Cenergy is a dynamic, diverse, woman-owned company that has provided stellar support to our clients globally for over 25 years! We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.
Technician
Posted: 05/29/2024
2024-05-29
2024-09-08
Job Category: Technical
Job Number: 180226
Pay Rate: $25.00 - $30.00
Job Description
Roles and Responsibilities:
****Work location is Gilbert AZ NOT Orlando, FL. 1444 W. Scott Avenue Gilbert, AZ 85233****
Please only submit candidates that are local to the Gilbert, AZ site.
Safety Shoes will be required.
The individual will
work on site full time,
perform depot level repairs, modifications, refurbishments of specific components of the Modernized Target Designation Sight/Pilotage Night Vision System (M-TADS/PNVS),
perform solder to J-STD-001, IPC-7711/IPC-7721 standards,
perform electrical rework/repair of cable harnesses, electrical wires, and circuit card assemblies,
operate automated or general-purpose test equipment (oscilloscopes, multi-meters, network analyzers and waveform generators) and uses knowledge of basic AC/DC theory to read, interpret engineering drawings and schematics to conduct fault isolation of faulty components,
complete work in accordance with engineering drawings, schematics, Repair Component Procedures (RCPs), Field Advisory Bulletins (FABs), and Contactor Installation Procedures (CIPs),
document work in automated maintenance data collection systems IAW Apache Fire Control processes and procedures, and
performs test and checkout of mechanical, electrical, structural, hydraulic subsystems and complete systems.
Qualifications and Education Requirements:
Minimum HS Diploma / GED
Required Skills/Experience:
3+ years experience with INDUSTRY SOLDERING - Experience with soldering surface mount (SMT) and through hole components to PWBs
Trained in IPC specification J-STD-001.
Experience with microscopes
Able to identify and touch up poor wetted solder joints, solder voids / insufficient solder, solder shorts/ bridges, misaligned parts / leads, components and any out solder defects that may occur during the SMT operation.
Ability to perform electrical measurements and analysis using (Multimeters, Oscilloscope, Logic Analyzers, network analyzers and waveform generators)
3+ years experience with safety wire assemblies and connectors
3+ years experience with solder and repair cables and harnesses
3+ years experience with of Microsoft Office suite of programs
Must be able to read instructions and identify standard SMT components.
High School diploma, or equivalent experience/combined education, with additional technical training sufficient to perform preventive and demand maintenance tasks and minimum of 1 Year of experience.
Ability to understand schematics, generate rework instructions, diagnose faults and troubleshoot
Ability to lift 35 pounds.
Ability to adapt to dynamic and frequently changing customer requirements
Ability to understand policies and procedures for the control of Government property
Ability to work with hazardous materials
Ability to mix and weigh chemicals
Desired Skills:
Solder certification to J-STD-001, IPC-7711/IPC-7721
#CJ Secret
For more information, please email us at clearedemployee@cenergyintl.Com
Pay Range:
The pay range for this position is $25.00-30.00 per hour; however, the pay offered may vary depending on job-related knowledge, skills, and experience. This pay information is being provided pursuant to applicable law and is based in part on market location.
Please Note:
Must have a valid driver s license and current state required minimum vehicle insurance coverage to drive onto Client and Company property.
Benefits:
The benefits available with this position include:
- Ongoing Training (RSO, Systems, Software Programs, OSHA Safety, JJ Keller, etc.)
- Continuous Employment Development and Learning
- Ongoing Advocacy, internal assets with HSE, Legal and HR teams and experts to aid in Employee Career Path and Advancement
- 401K
- Aetna Group Medical Coverage & Kaiser for California only
- Dental Insurance Coverage
- Vision Insurance Coverage
- Basic Life Insurance & AD&D
- Long Term Disability
- Voluntary Short-Term Disability
- Direct Deposit
- Health Savings and Flexible Spending Accounts
Cenergy is a dynamic, diverse, woman-owned company that has provided stellar support to our clients globally for over 25 years! We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.
Share This Job:
Related Jobs:
Login to save this search and get notified of similar positions.About Gilbert, AZ
Ready to take the next step in your career? Explore exciting job opportunities in and around Gilbert, Arizona, a vibrant city with endless growth potential. Known for its charming downtown area filled with local boutiques and eateries, Gilbert offers a unique blend of urban amenities and suburban charm. With a thriving arts scene, including galleries like Art Intersection and theaters like Higley Center for the Performing Arts, there's no shortage of cultural experiences to enjoy. Not to mention, being in close proximity to popular outdoor destinations like the Riparian Preserve at Water Ranch and the stunning Superstition Mountains, Gilbert is the perfect place for those who love both city living and outdoor adventures. Join us in discovering why Gilbert, AZ, is the ideal location to advance your career!