Cenergy International
https://cdn.haleymarketing.com/templates/62343/logos/sm-logo-200x200.png
http://www.cenergyintl.com
http://www.cenergyintl.com
USD
49.32
60.91
HOUR
true
Roles and Responsibilities:
JOB SUMMARY
The Mechanical Engineer Temp will carry out engineering assignments concerned with the planning, design and testing of mechanical equipment, systems, and processes. Works cooperatively with other departments. Supports higher level engineers for medium level complexity projects.
ESSENTIAL DUTIES & RESPONSIBILITIES
Designs mechanical equipment, systems and processes. Performs calculations and analyses to ensure suitability of design. Solves problems related to the assembly, repair and test of environmental control systems. Under general supervision, performs assignments which involve responsibility for a secondary project or a part of a major project. Defense or aerospace industry experience desired. Experience in the development of thermal systems is a strong plus. Experience with electrical circuits and control theory a plus. May give directions and/or guidance to junior level engineers, designers and drafters.
Works with colleagues in the department and in other departments. Writes reports as required. Presents designs to peers, other engineers and customers.
Understanding of military specifications, environmental specifications, and test specifications desired. Hands-on test and hardware experience is required. Requires strong oral/written communication skills and must be capable of conducting effective oral presentations to customers.
Qualifications and Education Requirements:
EDUCATION AND EXPERIENCE
LEVEL 6:
Bachelor s degree (B.S.M.E) from four-year College or University or equivalent. Minimum two years of experience with design, analysis and development of industrial equipment. Knowledge of applied thermodynamics and mechanical design. Knowledge of drawing and drafting standards a plus. Capable of carrying out assignments concerned with mechanical equipment. Works under supervision, performs assignments of medium complexity and may assist senior engineers with more complex assignments.
LANGUAGE SKILLS
LEVEL 4:
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond professionally to questions from groups of managers, clients, customers, and the general public. Ability to communicate in English.
Very good oral and written communication skills. Should be capable of making presentations to customers. Written reports and technical documents are required.
MATHEMATICAL SKILLS
LEVEL 5:
Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as statistics, frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.
REASONING ABILITY
LEVEL 5:
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
Develops and adapts to new research and development principles for application to product development. Determines nature/scope of testing necessary to meet project goals and requirements.
INTERPERSONAL SKILLS
As a member of the organization, the employee is expected to work effectively with co-workers, customers and others by sharing ideas in a constructive and positive manner; listening to and objectively considering ideas and suggestions from others; keeping commitments; keeping others informed of work progress, timetables and issues; addressing problems and issues constructively to find mutually acceptable and practical business solutions; addressing others by name, title or other respectful identifier; and respecting the diversity of our work force in actions, words, and deeds.
INTERACTIONS
Needs to be open-minded. Required to be a team player, cooperating with colleagues as required. Work may be independent, but will have interactions with fellow engineers and members from other departments, customers, vendors and corporate management. Should be capable to work individually and independently and under time pressure and lack of resources. Provides technical guidance and assistance to lower level engineers.
COMPUTER SKILLS
Spreadsheets & word processing. CAD proficiency. Knowledge in analysis software is an advantage.
TOOLS/EQUIPMENT USED ON THE JOB
SolidWorks CAD system. Hand tools.
May use mechanical hand tools when assembling prototypes or test setups.
Preferred:
Pay Range:
The pay range for this position is $49.32- $60.91 per hour; however, the pay offered may vary depending on job-related knowledge, skills, and experience. This pay information is being provided pursuant to applicable law and is based in part on market location.
Benefits:
The benefits available with this position include:
Cenergy is a dynamic, diverse, woman-owned company that has provided stellar support to our clients globally for over 25 years! We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.
Mechanical Engineer
Posted: 11/12/2024
2024-11-12
2025-01-08
Job Category: Engineering
Job Number: 181301
Pay Rate: $49.32 - $60.91
Job Description
Roles and Responsibilities:
JOB SUMMARY
The Mechanical Engineer Temp will carry out engineering assignments concerned with the planning, design and testing of mechanical equipment, systems, and processes. Works cooperatively with other departments. Supports higher level engineers for medium level complexity projects.
ESSENTIAL DUTIES & RESPONSIBILITIES
Designs mechanical equipment, systems and processes. Performs calculations and analyses to ensure suitability of design. Solves problems related to the assembly, repair and test of environmental control systems. Under general supervision, performs assignments which involve responsibility for a secondary project or a part of a major project. Defense or aerospace industry experience desired. Experience in the development of thermal systems is a strong plus. Experience with electrical circuits and control theory a plus. May give directions and/or guidance to junior level engineers, designers and drafters.
Works with colleagues in the department and in other departments. Writes reports as required. Presents designs to peers, other engineers and customers.
Understanding of military specifications, environmental specifications, and test specifications desired. Hands-on test and hardware experience is required. Requires strong oral/written communication skills and must be capable of conducting effective oral presentations to customers.
Qualifications and Education Requirements:
EDUCATION AND EXPERIENCE
LEVEL 6:
Bachelor s degree (B.S.M.E) from four-year College or University or equivalent. Minimum two years of experience with design, analysis and development of industrial equipment. Knowledge of applied thermodynamics and mechanical design. Knowledge of drawing and drafting standards a plus. Capable of carrying out assignments concerned with mechanical equipment. Works under supervision, performs assignments of medium complexity and may assist senior engineers with more complex assignments.
LANGUAGE SKILLS
LEVEL 4:
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond professionally to questions from groups of managers, clients, customers, and the general public. Ability to communicate in English.
Very good oral and written communication skills. Should be capable of making presentations to customers. Written reports and technical documents are required.
MATHEMATICAL SKILLS
LEVEL 5:
Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as statistics, frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.
REASONING ABILITY
LEVEL 5:
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
Develops and adapts to new research and development principles for application to product development. Determines nature/scope of testing necessary to meet project goals and requirements.
INTERPERSONAL SKILLS
As a member of the organization, the employee is expected to work effectively with co-workers, customers and others by sharing ideas in a constructive and positive manner; listening to and objectively considering ideas and suggestions from others; keeping commitments; keeping others informed of work progress, timetables and issues; addressing problems and issues constructively to find mutually acceptable and practical business solutions; addressing others by name, title or other respectful identifier; and respecting the diversity of our work force in actions, words, and deeds.
INTERACTIONS
Needs to be open-minded. Required to be a team player, cooperating with colleagues as required. Work may be independent, but will have interactions with fellow engineers and members from other departments, customers, vendors and corporate management. Should be capable to work individually and independently and under time pressure and lack of resources. Provides technical guidance and assistance to lower level engineers.
COMPUTER SKILLS
Spreadsheets & word processing. CAD proficiency. Knowledge in analysis software is an advantage.
TOOLS/EQUIPMENT USED ON THE JOB
SolidWorks CAD system. Hand tools.
May use mechanical hand tools when assembling prototypes or test setups.
Preferred:
Pay Range:
The pay range for this position is $49.32- $60.91 per hour; however, the pay offered may vary depending on job-related knowledge, skills, and experience. This pay information is being provided pursuant to applicable law and is based in part on market location.
Benefits:
The benefits available with this position include:
- Ongoing Training (RSO, Systems, Software Programs, OSHA Safety, JJ Keller, etc.)
- Continuous Employment Development and Learning
- Ongoing Advocacy, internal assets with HSE, Legal and HR teams and experts to aid in Employee Career Path and Advancement
- 401K
- Aetna Group Medical Coverage & Kaiser for California only
- Dental Insurance Coverage
- Vision Insurance Coverage
- Basic Life Insurance & AD&D
- Long Term Disability
- Voluntary Short-Term Disability
- Direct Deposit
- Health Savings and Flexible Spending Accounts
Cenergy is a dynamic, diverse, woman-owned company that has provided stellar support to our clients globally for over 25 years! We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.
Share This Job:
Related Jobs:
Login to save this search and get notified of similar positions.About Irvine, CA
Take the next step in your career journey in the vibrant city of Irvine, California! Nestled in the heart of Orange County, this thriving community offers unparalleled growth opportunities and an unbeatable quality of life. With its close proximity to stunning beaches, world-class shopping at South Coast Plaza, a bustling culinary scene featuring diverse cuisine options, and cultural attractions like the Irvine Museum and Irvine Barclay Theatre, Irvine has something for everyone. Whether you're into outdoor activities in Irvine Regional Park or catching a game at the Angel Stadium of Anaheim or the Honda Center, this region has it all. Explore our job listings today and discover why Irvine is the perfect place to advance your career!