Cenergy International
https://cdn.haleymarketing.com/templates/62343/logos/sm-logo-200x200.png
http://www.cenergyintl.com
http://www.cenergyintl.com
USD
45.00
60.00
HOUR
true
Seeking an Electrical or Mechanical Engineer who is familiar with flight control actuation systems to provide support to the Lower Tier Integrated Air and Missile Defense (IAMD) Patriot Advanced Capability (PAC) 3 Missile production related to guidance and flight control hardware procurement and integration and supporting the PAC3 System production.
Roles and Responsibilities:
The Candidate will support the subject matter expert (SME), resolving technical issues and monitoring a major subcontractor and related sub tier subcontractors. The position will provide oversight and technical evaluation of production non-conformances and participation in associated failure investigations, and evaluation of vendor engineering change proposals. The ideal candidate will have knowledge of system performance characterization using DC motor parameters, torque-speed curves, step and frequency response, and experience providing design and production manufacturing support of electro-mechanical servo systems comprised of DC motors, controllers, gear and ball screw drive trains, and feedback devices.
The Candidate must be able to work in a collaborative Integrated Product Team (IPT) environment. The candidate should be a self-starter with excellent verbal and written communication skills and have the ability to effectively interact with customers and contractors in a fast paced environment. The ideal candidate will have some experience on a learning trajectory in the field of servo control, and must possess an active (or be able to obtain) a DoD secret security clearance. Domestic travel approximately 10-20 % is anticipated for support at production integration, supplier, and customer test facilities.
Qualifications and Education Requirements:
Basic Qualifications:
Bachelor degree in Mechanical or Electrical Engineering or a related field with minimum 2 years of relevant experience, or no experience with a Master degree.
Experience with technical liaison support and failure root cause analysis.
Experience with production, integration, and test of electro-mechanical subsystems.
Exposure to analysis of control systems
3+ years of experience/exposure to motors or control systems
General knowledge of brushless DC motor design and performance characterization.
Ability to travel to production and customer sites.
Must have the ability to obtain a DoD Special Clearance.
Desired Qualifications:
Multi-discipline engineering experience with systems analysis and electro-mechanical design.
An understanding of electro-mechanical servo control theory.
Design experience with bearings, gear and ball screw mechanism drive systems.
Experience in risk management.
4x10 First Shift schedule: typically 7: 30am-5: 30pm Monday through Thursday.
Pay Range:
The pay range for this position is $45.00-60.00 per hour; however, the pay offered may vary depending on job-related knowledge, skills, and experience. This pay information is being provided pursuant to applicable law and is based in part on market location.
Please Note:
Must have a valid driver s license and current state required minimum vehicle insurance coverage to drive onto Client and Company property.
Benefits:
The benefits available with this position include:
Cenergy is a dynamic, diverse, woman-owned company that has provided stellar support to our clients globally for over 25 years! We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.
Electrical Engineer
Posted: 12/14/2023
2023-12-14
2024-03-24
Job Category: Engineering
Job Number: 179285
Pay Rate: $45.00 - $60.00
Job Description
Seeking an Electrical or Mechanical Engineer who is familiar with flight control actuation systems to provide support to the Lower Tier Integrated Air and Missile Defense (IAMD) Patriot Advanced Capability (PAC) 3 Missile production related to guidance and flight control hardware procurement and integration and supporting the PAC3 System production.
Roles and Responsibilities:
The Candidate will support the subject matter expert (SME), resolving technical issues and monitoring a major subcontractor and related sub tier subcontractors. The position will provide oversight and technical evaluation of production non-conformances and participation in associated failure investigations, and evaluation of vendor engineering change proposals. The ideal candidate will have knowledge of system performance characterization using DC motor parameters, torque-speed curves, step and frequency response, and experience providing design and production manufacturing support of electro-mechanical servo systems comprised of DC motors, controllers, gear and ball screw drive trains, and feedback devices.
The Candidate must be able to work in a collaborative Integrated Product Team (IPT) environment. The candidate should be a self-starter with excellent verbal and written communication skills and have the ability to effectively interact with customers and contractors in a fast paced environment. The ideal candidate will have some experience on a learning trajectory in the field of servo control, and must possess an active (or be able to obtain) a DoD secret security clearance. Domestic travel approximately 10-20 % is anticipated for support at production integration, supplier, and customer test facilities.
Qualifications and Education Requirements:
Basic Qualifications:
Bachelor degree in Mechanical or Electrical Engineering or a related field with minimum 2 years of relevant experience, or no experience with a Master degree.
Experience with technical liaison support and failure root cause analysis.
Experience with production, integration, and test of electro-mechanical subsystems.
Exposure to analysis of control systems
3+ years of experience/exposure to motors or control systems
General knowledge of brushless DC motor design and performance characterization.
Ability to travel to production and customer sites.
Must have the ability to obtain a DoD Special Clearance.
Desired Qualifications:
Multi-discipline engineering experience with systems analysis and electro-mechanical design.
An understanding of electro-mechanical servo control theory.
Design experience with bearings, gear and ball screw mechanism drive systems.
Experience in risk management.
4x10 First Shift schedule: typically 7: 30am-5: 30pm Monday through Thursday.
Pay Range:
The pay range for this position is $45.00-60.00 per hour; however, the pay offered may vary depending on job-related knowledge, skills, and experience. This pay information is being provided pursuant to applicable law and is based in part on market location.
Please Note:
Must have a valid driver s license and current state required minimum vehicle insurance coverage to drive onto Client and Company property.
Benefits:
The benefits available with this position include:
- Ongoing Training (RSO, Systems, Software Programs, OSHA Safety, JJ Keller, etc.)
- Continuous Employment Development and Learning
- Ongoing Advocacy, internal assets with HSE, Legal and HR teams and experts to aid in Employee Career Path and Advancement
- 401K
- Aetna Group Medical Coverage & Kaiser for California only
- Dental Insurance Coverage
- Vision Insurance Coverage
- Basic Life Insurance & AD&D
- Long Term Disability
- Voluntary Short-Term Disability
- Direct Deposit
- Health Savings and Flexible Spending Accounts
Cenergy is a dynamic, diverse, woman-owned company that has provided stellar support to our clients globally for over 25 years! We hire extraordinary people, and each of our team members are encouraged to embody our core values to drive innovation and own it with integrity and trust while adding to our positive and forward-thinking atmosphere.
Share This Job:
Related Jobs:
Login to save this search and get notified of similar positions.About Grand Prairie, TX
Explore exciting job opportunities in the vibrant area surrounding Grand Prairie, Texas! This bustling region, located between Dallas and Fort Worth in the heart of the Lone Star State, offers a blend of southern charm and modern opportunities. With attractions like the AT&T Stadium, home to the Dallas Cowboys, and the stunning Ripley's Believe It or Not! museum, there's never a dull moment in Grand Prairie. Discover a thriving arts scene at the Uptown Theater downtown, or immerse yourself in the local flavors with delicious Tex-Mex cuisine. Join us in this dynamic community of growth and opportunity, where your career aspirations can truly thrive. Browse our job listings today and take the next step towards an exciting career in Grand Prairie, Texas!